To enjoy a smooth and flavourful shisha session, it’s essential to know how to light your coals correctly. Whether you’re a seasoned shisha smoker or a beginner, lighting coals can be a bit tricky. In this article, we will guide you through the process of lighting coals for shisha, so you can have the best smoking experience possible.
Natural coconut coals are the most popular choice for shisha smokers. They are eco-friendly and produce less ash than other types of coal. Before lighting your coals, make sure they are completely dry and free of any moisture. Wet coals can be dangerous to light and may cause them to spark or crackle. Once you’ve checked your coals, you’re ready to start lighting them.
The easiest and safest way to light your coals is by using an electric coil stove with an exposed heating coil or a single coil heater. Avoid using a flat top electric stove as natural coals can crack the glass stove top. You can also use a gas stove, but it requires a bit of ingenuity. In the next section, we will guide you through the process of lighting coals using an electric coil stove or a single coil heater.
Types of Coal for Shisha
When it comes to lighting coals for your shisha, there are two main types of coals to choose from: quick lighting coals and natural coals. Each type has its own advantages and disadvantages, so it’s important to understand the differences between them before you make a decision.
Quick Lighting Coals
Quick lighting coals are the most common type of coal used for shisha. As the name suggests, these coals are designed to light quickly and easily, usually with the help of a lighter or match. They are made from compressed charcoal dust and are infused with chemicals that help them light quickly.
One of the advantages of quick lighting coals is that they are very easy to use. They light quickly and produce a lot of heat, which makes them ideal for people who want a quick and easy smoking experience. However, they also have some disadvantages. For example, they can produce a lot of ash, which can clog up your shisha and affect the taste of your smoke. They can also produce a chemical taste, which can be unpleasant for some people.
Natural coals are made from compressed coconut shells or wood and do not contain any chemicals. They are designed to burn slowly and produce a consistent heat, which makes them ideal for shisha smoking. They are also environmentally friendly, as they do not produce any harmful chemicals or pollutants.
One of the advantages of natural coals is that they produce a clean, pure taste that is free from any chemical flavours. They also produce less ash than quick lighting coals, which means you won’t have to clean your shisha as often. However, they do have some disadvantages. For example, they can take longer to light than quick lighting coals, which means you’ll need to be patient. They also produce less heat than quick lighting coals, which means you may need to use more coals to achieve the same level of heat.
Overall, the type of coal you choose will depend on your personal preferences and the type of smoking experience you want. If you want a quick and easy smoking experience, quick lighting coals may be the best option for you. However, if you want a clean, pure taste and are willing to be patient, natural coals may be the better choice.
Choosing the Right Coal
When it comes to choosing the right coal for your shisha, there are two main options: quick-light coals and natural coals. Quick-light coals are infused with chemicals that help them light quickly, while natural coals are made from compressed wood, coconut shells, or bamboo.
Quick-light coals are a good option if you’re short on time or don’t have access to a stove or hot plate. They typically light in just a few minutes and don’t require any additional heat source. However, they can add a chemical taste to your shisha and produce more ash and smoke than natural coals.
Natural coals, on the other hand, are a great choice if you want a cleaner, more natural smoking experience. They take longer to light, but once they’re hot, they burn evenly and produce less ash and smoke than quick-light coals. They also don’t add any unwanted flavors to your shisha.
When choosing natural coals, look for brands that are made from high-quality materials and have been thoroughly tested for safety. Avoid coals that contain chemicals or additives, as these can be harmful when burned.
Overall, the choice between quick-light and natural coals comes down to personal preference. If you’re looking for convenience and speed, quick-light coals are the way to go. But if you want a cleaner, more natural smoking experience, natural coals are the better choice.
Preparing the Coals
Lighting Quick Lighting Coals
Quick lighting coals are an easy option for those who want to light their coals quickly. These coals are infused with chemicals that allow them to light quickly, but they also produce a lot of ash and can affect the taste of your shisha. If you choose to use quick lighting coals, here’s how to prepare them:
- Remove the coals from the packaging and place them on a heat-resistant surface.
- Light the coals using a lighter or match.
- Wait for the coals to turn red and ash over completely.
- Blow on the coals to remove any excess ash.
- Place the coals on your hookah bowl and enjoy your session.
Lighting Natural Coals
Natural coals are a great option for those who want to avoid the chemicals found in quick lighting coals. However, they take longer to light and require a bit more preparation. Here’s how to prepare natural coals:
- Place the coals on a heat-resistant surface and light them using a lighter or match.
- Wait for the coals to turn red and ash over completely.
- Blow on the coals to remove any excess ash.
- Place the coals on a coal carrier or tongs and let them cool for a few minutes.
- Once the coals have cooled, place them on your hookah bowl and enjoy your session.
Pro tip: To speed up the process of lighting natural coals, you can use a coal burner. This is a special device designed to light natural coals quickly and evenly. It’s a great investment for those who smoke hookah regularly.
When it comes to lighting coals for shisha, safety should always be your top priority. Here are some important safety measures to keep in mind:
- Always use a proper coal burner or stove. Never use a gas stove or any other heating element that is not specifically designed for lighting coals.
- Only use natural coconut coals or quick-light coals that are specifically designed for shisha. Never use charcoal briquettes or any other type of coal that is not intended for shisha.
- Never light coals indoors. Always light them in a well-ventilated area, preferably outdoors or in a well-ventilated room.
- Always wear heat-resistant gloves when handling hot coals. Use tongs to move the coals around, and never touch them with your bare hands.
- Keep a fire extinguisher nearby just in case of any accidents.
- Never leave coals unattended while they are burning. Always keep an eye on them and make sure they are fully extinguished before disposing of them.
By following these safety measures, you can ensure that your shisha sessions are enjoyable and safe for everyone involved.
Pro Tip: If you’re using a coal burner, make sure to turn it off immediately after your coals are done. This will help prevent any accidents and ensure that your burner lasts longer.
Troubleshooting Common Issues
If you’re experiencing issues with lighting your hookah coals, don’t worry. There are a few common problems that can arise and some simple solutions to fix them.
Coals Not Lighting Properly
If your coals are not lighting properly, it could be due to a few reasons. First, make sure you’re using the correct type of coal for your setup. If you’re using natural coals, they may require a longer time to light. In this case, make sure you’re using a proper heat source, such as an electric coil stove or single coil heater.
If you’re using quick light coals, make sure you’re lighting them properly. Quick light coals have a chemical coating that ignites when exposed to a flame, so make sure you’re holding the coal over the flame until it’s fully lit.
Coals Extinguishing Too Quickly
If your coals are extinguishing too quickly, it could be due to insufficient heat or airflow. Make sure your coals are fully lit before placing them on the bowl. Additionally, make sure there’s enough airflow in your setup to keep the coals burning.
If you’re experiencing harsh smoke, it could be due to a few reasons. First, make sure your coals are fully lit before placing them on the bowl. Additionally, make sure you’re not over-packing your bowl, as this can lead to a restricted airflow and harsh smoke.
Now that you know how to light coals for shisha, you can enjoy a great smoking experience with your hookah. Remember to choose the right type of coal for your needs, and to follow the safety precautions to avoid accidents.
When lighting natural coals, always use a heat source that is safe and reliable, such as an electric coil stove or a single coil heater. Avoid using a gas stove, as it can be dangerous and cause explosions.
When using self-igniting coals, make sure to light them properly and give them enough time to heat up before placing them on the hookah. This will ensure that you get the best possible smoke session.
Finally, always handle the coals with care and use tongs or a charcoal carrier to avoid burning yourself. With these tips in mind, you can enjoy a safe and satisfying shisha experience every time.
Frequently Asked Questions
What is the best way to light coconut charcoal for shisha?
To light coconut charcoal for shisha, the best way is to use a charcoal burner or an electric stove with an exposed heating coil. Avoid using flat top electric stoves as the coals may crack the glass stove top. Coconut charcoal is a natural type of charcoal that burns clean and produces little ash. It is also eco-friendly and lasts longer than quick light charcoal.
How do I light quick light charcoal for shisha?
Quick light charcoal is easy to light with just a lighter or match. Simply light the coals and they should immediately start to spark and turn red, then finally greyish. Wait until they have turned greyish before placing them on your shisha, as they are not fully lit until they turn grey. Quick light charcoal is a fast and convenient option, but it may produce more ash and chemicals than natural coconut charcoal.
What is the recommended number of coals for a shisha session?
The recommended number of coals for a shisha session depends on the size of your bowl and the type of charcoal you are using. As a general rule, start with two to three coals and adjust the heat as needed. If you are using quick light charcoal, you may need to add more coals as they burn faster than natural coconut charcoal.
Can I use a pan to heat up hookah coals?
While it is possible to heat up hookah coals using a pan, it is not recommended. This method can be dangerous and may cause the coals to explode or release harmful chemicals. It is best to use a charcoal burner or an electric stove with an exposed heating coil to light your coals safely.
Is it possible to light shisha coals with a lighter?
Yes, it is possible to light shisha coals with a lighter or match. However, it may take longer to light the coals and they may not burn as evenly as when using a charcoal burner or electric stove. If you choose to use a lighter, be sure to hold the flame to the coal for several seconds to ensure it is fully lit.
How can I tell when hookah coals are ready to use?
Hookah coals are ready to use when they have turned greyish in colour and are producing a consistent heat. This may take several minutes depending on the type of charcoal you are using and the method of lighting. Avoid using coals that are still sparking or have black spots, as they may produce a harsh taste and affect the quality of your shisha experience.